Keeping it Simple: How to Build a DIY Fire Pit for Only $60

Wednesday, June 1, 2016

How to Build a DIY Fire Pit for Only $60


This post contains affiliate links. 

Over the weekend my husband and I decided to build a fire pit in our back yard.  We have been wanting one for a couple years now and finally got to it.  I was so surprised by how easy and quick it was to make.  It only took us about a morning to make it and we love how it turned out!  So much better than the ones that you buy and so much cheaper too!  I cannot wait to use this all summer long! 


This is how we made it:
We headed to both home improvement stores to look for pavers and we ended up with these 12" gray pavers from Home Depot.  They were only $.77 each!!  We got 36 of them (12 for each level).  


Once we got the pavers home, we laid them out in a circle with 12 pavers in the circle.  Since these pavers have a little lip on them we had to make the bottom circle bigger (so there were gaps in between the pavers, which is not shown in the picture).  Then as we put the pavers onto it, the circles go smaller.  So what we did was put the pavers in a circle with no gaps and then move each paver roughly 1.5 to 2 inches out.  


We then built the pavers up three levels.  We ended up having to do this a couple times to get the top layer with as little gaps as possible.  For more added support, you could use concrete in the gaps too.  

Now for the floor.  This is one of my favorite parts of the fire pit.  We used some pavers that were square and some that were kind of a triangle shape, they fit nicely with the square ones.  They were are Home Depot too and were around $.68 each.  We ended up with 24 of the squares one and 8 of the triangles ones.  We laid them down onto the ground in the fire pit in a pattern that filled the circle as best as we could.  

We ended up having a use a hammer to chip off a little piece of the triangle ones to make it fit, but you can't tell when it's all done. 

Once the floor was in, we took a some paver sand and put it into the cracks and sides of the flooring.  Then using our hands and a broom, distributed it evenly all over 

Here is what the floor looks like with the sand in.  

And that's it!!! Doesn't it look so cool?!  So much better that the metal ones at the store, plus it's nice that no one can tip it over (my kids did that.... dropped all the ashes onto the ground with our old metal fire pit). 

Here is a quick break down of the costs-
36 gray pavers at $.77= 27.72
24 square pavers at $.68= 16.32
8 triangle pavers at $.66= 5.28
Paver sand= 3.97
Making the total $53.29 before taxes.  :)
We got to sit back and enjoy the fire as a family! 

And of course enjoy some yummy s'mores too! 


Here are some more ideas you might like:



turquoise-pendant-light-how-to-dye-a-light-shade (15)

DIY-Large-Barn-Door-with-Burned-Wood-Finish (43)

DIY-Dining-Table-With-Burned-Wood-Finish #Bernzomatic (51) 

#ad DIY-bathroom-shelf-for-razor-and-beard-trimmer #GiftofPhillips  (29)


8 comments:

JoAnn SweetPepperRose said...

This is a really nice fire pit! I've been wanting one in my backyard as well.

Sera Daisy said...

How do you clean out the ashes? Thaks!

Angela said...

Beautiful! We are planning to make one next week. I saw round cooking grates on Amazon that fit over pits like these that come in various diameters. Can you share the diameter of the center of your pit? (I'm checking prices.)

Scott Nichols said...

What is the diameter of the fire pit?

Scott Nichols said...

What is the diameter of the fire pit?

James R said...

Nice fire pit. What is your suggestion to prevent the pavers from cracking/breaking from the heat of the fire?

James R said...

Nice fire pit. How do you suggest to prevent the pavers from cracking/breaking from the heat of the fire?

Romilda Gareth said...

thanks